Links

 NOAA 

 
H1N1 Flu Information 


Community Collaborative Rain, Hail & Snow Network


FEMA Independent Study Program


Texas Forest Service


Immunizations

National Weather Service


Build your disaster plan

                   What is Hazard Mitigation? 

Hazard Mitigation is "any action taken to reduce or eliminate the long-term risk to human life and property from natural hazards". We understand that hazard events will continue to occur, and at their worst can result in death and destruction of property and infrastructure. The work done to minimize the impact of hazard events to life and property is called Hazard Mitigation. Often, these damaging events occur in the same locations over time (i.e. flooding along rivers), and cause repeated damage. Because of this, Hazard Mitigation is often focused on reducing repetitive loss, thereby breaking the disaster cycle.

The essential steps of Hazard Mitigation are:

1. Hazard Identification. First we must discover the location, potential extent, and expected severity of hazards. Hazard information is often presented in the form of a map or as digital data that can be used for further analysis. It is important to remember that many hazards are not easily identified, for example, many earthquake faults lie hidden below the earth's surface.

2. Vulnerability Analysis. Once hazards have been identified, the next step is to determine who and what would be at risk if the hazard event occurs. Natural events such as earthquakes, floods, and fires are only called disasters when there is a loss of life or destruction of property.

3. Defining a Hazard Mitigation Strategy. Once we know where the hazards are, and who or what could be affected by a disaster, we have to strategize about what to do to prevent a disaster from occuring or to minimize the effects if it does occur. The end result should be a Hazard Mitigation plan that identifies long-term strategies that may include planning, policy changes, programs, projects and other activities, as well as how to implement them. Hazard Mitigation plans should be done at every level including individuals, businesses, state, local, and federal governments.

4. Hazard Mitigation Activities and Projects. Once the Hazard Mitigation plans and strategies are developed, they must be followed for any change in the disaster cycle to occur. Hazard Mitigation activities are meant to be permanent or long-term fixes and include a number of options such as:

- Land-use planning and regulation of development in hazard zones such as floodplains land wildland-urban interface areas.

- Development and enforcement of building codes.

- Retrofitting structures.

-Removing structures from hazardous areas.

There are many other types of mitigation activities that can be done by individuals, businesses, and government. You can be part of the solution to break the disaster cycle by being aware of the hazards that may affect you and your community and becoming active in your community's hazard mitigation planning process.

         
Emergency Mngmt. Coordinator
Donny Daniel, Mayor
903.432.3522
Mayor@tooltexas.org
 
County E.M.C.
Joy Kimbrough
(903) 677-7242

Hazard Planning

 



Website Builder